1003EHandle Bar
Long Bar Handle for Coffin and Casket 1003E in Customized Length by Electronic Plated to Gold or Antique Color
Zinc Alloy (metal) + Steel bar · lifts 150kgs/pc
Home / Products / Metal Handle / Handle Bar / Funeral supplier and long bar handle for wooden coffin...
Handle Bar
Funeral supplier and long bar handle for wooden coffin and casekt 1004-1.8M in Antique brass plated with customized length
Ref 1004-1.8M
metal
Lifts 150kgs
MOQ 1000pcs
Funeral supplier and long bar handle for wooden coffin and casekt 1004-1.8M in Antique brass
The long bar handle 1004, it can be customized the length with 3 claws or 4 claws, the twisted steel bar is 22 diameter, and the length can be 100cm, 140cm or 180cm.
Virtue Hardware Co., Ltd is one of good manufacturers in funeral products in China, we are dedicated in coffin handle, coffin ornament, cross and crucifix, name plate casket arm, swing bar and all kinds hardware which are of related coffin and casket. We have more than ten years’ experience, the products were exported Europe, Africa, South American. Our main products is made of zamac (zinc alloy), which produced by die casting, then by polished and electronic plating, it will can plated to Gold (GP), Nickel (NP), Antique Brass (AB), Antique copper (AC) and so on. This kinds of product are high level product for the funeral products. Meanwhile, we also produce the article by plastic material such as PP, ABS or recycle material, it will be more economic for the cremation. By injection machine, it will be form the shape as the mould, then we will make the vacuum metallization and color coating, it will be finish the gold, silver or copper color. Some ABS products can also be plated into antique brass or antique copper. Except above item, we also have an ability to produce some article by steel, stainless steel (304# or 316#) or aluminum alloy. “To supply high quality and competitive price” is our goal. Welcome all friend to visit our plant and make an good business.
Customized length extend coffin handle 1002E in antique brass color
Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.
Material
metal
Lift weight
150kgs
MOQ
1000pcs
Lead time
30 days
Key Benefits
Why This Model Is Specified
Tested Lift Weight
This model is rated at 150kgs. Load bearing models are checked on our own lift weight rig rather than quoted from a catalogue.
Hand Polished Before Finishing
Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.
Made On Our Own Tooling
The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.
Application Scenarios
Where It Is Used
- Solid wood and veneered coffins for burial
- Metal and steel caskets with rail or swing bar fittings
- Long side bars on continental style coffins
- Replacement and refurbishment work in funeral homes
Who It Is For
Buyers Who Specify This Item
- Coffin and casket manufacturers
- Funeral hardware importers and wholesalers
- Funeral homes and funeral directors
- Traders and buying offices sourcing funeral hardware from China
Problems It Solves
What Goes Wrong Without It
- Fittings sold without a stated load figure. This one is rated at 150kgs per piece.
- Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
- Waiting on a supplier who has to sub-contract the tooling before anything can be made.
- Small parts that no factory wants to quote because the volume is modest.
Not sure this is the right reference?
Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.
Talk To An EngineerTechnical Features
Specification Summary
| Material | metal |
|---|---|
| Size | 180cm |
| Rated lift weight | 150kgs |
Specifications
Full Specification Table
| Place of Origin | China |
|---|---|
| Brand Name | THC |
| Model Number | 1004-1.8M |
| Type | Coffin Accessories |
| Material | metal |
| Style | European style |
| Application | Adult |
| Material | Zinc alloy and steel pipe |
| Length | 180cm |
| Application | Wooden coffin and casket |
| Lift weight | 150kgs |
| Twisted bar diameter | 22mm |
| Available color | Gold, Antique brass or Antique copper |
| MOQ | 1000pcs |
Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.
Materials And Manufacturing Process
How This Item Is Produced
Material for this reference is metal.
Tooling
The die is cut and trialled in our own workshop.
Die casting
Zamak #3 is die cast on our casting machines.
Hand polishing
Every casting is hand polished before it reaches the plating line.
Electroplating
Gold, nickel, antique brass, antique copper or chrome.
Assembly and packing
Bars, caps and screws are matched, then counted and packed.
Quality Control
What We Check Before Packing
- Incoming material is checked before it goes into the casting or moulding cell.
- Castings and mouldings are inspected in process, not only at the end of the line.
- Load bearing models are checked on our own lift weight test rig.
- Plating and coating tone is compared against the approved reference sample.
- Counting and packing are checked before the carton is closed.
Documents
What Can Travel With The Order
Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.
Customization Options
What Can Be Changed
- Finish and tone, agreed against a physical reference sample rather than a colour name.
- Bar length and screw specification, cut to the coffin size you actually build.
- Packing format, including packing by the set so one carton serves one coffin.
- Dimensional changes to an existing design where the tooling allows it.
- Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Comparison With Other Products
How It Compares
| This model | Die cast in metal, hand polished and electroplated, rated at 150kgs. |
|---|---|
| Metallized plastic equivalent | Lower unit cost and lighter, suited to cremation coffins, with a coated rather than plated finish. |
| Stamped steel fitting | Cheaper again but flatter in profile, with far less ornament detail available. |
Use Guide
Fitting And Handling Notes
- Set out the handle positions along the coffin side and mark all screw holes before driving anything.
- Drill pilot holes in hardwood. Chipboard and MDF need the correct screw type or the thread will strip.
- Use the screw size stated in the specification. Too long and it breaks through the inside face.
- Tighten evenly across both fixing points rather than fully seating one side first.
- For a movable handle, check the bar swings and returns freely before the coffin leaves the bench.
- Never rely on fewer handles than the coffin weight calls for. Divide the loaded weight by the rated lift weight and add margin.
Related Products
More From Handle Bar
1004Handle Bar
Metal Coffin Handle 1004 in different size and gold or antique brass plating
Zamak #3 with Steel Bar (Dia. 22mm) · lifts 150kg/pc
1005Handle Bar
Burial handle for coffin 1005 square pipe and gold plating
Zamak #3 with Steel square pipe (Dia. 20mm) · lifts 150kg/pc
1005ABHandle Bar
Antique Coffin Handles 1005 funeral handle and fittings in metal material
Zinc alloy · lifts 150kg/pc
1006Handle Bar
Polished Coffin Handle 1006 Egg Design with M6 screw rod and nuts
Zamak #3 with Steel pipe (Dia. 25mm) · lifts 150kg/pc
1007Handle Bar
Funeral handle 1007 with two screw holes at each point and high polish and gold plating
Zamak #3 with Steel pipe (Dia. 25mm) · lifts 150kg/pc
1008Handle Bar
Swing Bar Coffin Handle 1008 in Metal Material and Antique Brass Color for Funeral Coffin Handle
Zamak #3 with Steel Bar · lifts 150kg/pc
1008-2Handle Bar
Heavy duty coffin handle with zamak point for funeral suppiler metal handle 1008-2
Zinc alloy with Woodenl Bar or Steel Bar (Dia. 30mm) · lifts 180kg/pc
Related Applications
Who Buys This And Why
Industry
Coffin & Casket Manufacturers
Container volume hardware with repeatable plating and matched sets for the assembly bench...
Industry
Funeral Homes & Directors
Hardware you can rely on during a service and hold as spares for repairs and refurbishment...
Industry
Importers & Distributors
A full programme from one factory so a container carries handles crucifix corners and urns together...
Industry
Cremation Providers
Light metallized fittings for coffins that will be cremated and urns for what comes after...
Related Articles
Background Reading
Buying Guide
How To Choose Coffin Handles
Fixed handles, movable swing handles, long handle bars and complete handle sets compared by load, assembly tim...
Process Guide
How Coffin Handles Are Made
The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...
Design Guide
Choosing A Finish For Coffin Hardware
Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...
Installation Guide
Fitting Coffin Handles And Decoration
Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...
Download the Metal Handle catalogue
Every reference in this range with images and specifications, as a PDF.
Questions
Questions About This Product
What is the minimum order quantity for this item?
The minimum order quantity for reference 1004-1.8M is 1000pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 30 days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
What does the lift weight rating mean?
It is the load one piece is rated to carry, 150kgs in this case. Divide the loaded coffin weight by that figure to work out how many pieces the coffin needs, then add margin. Load bearing models are checked on our own lift weight test rig.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.
Next Step
Get A Price For This Reference
Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.
WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244