Virtue Hardware Co., Ltd logo
Home / Products / Metal Crucifix & Fittings / Crucifix & Cross / Funeral Crucifix And Cross 8047 in Metal Material and...
Funeral Crucifix And Cross 8047 in Metal Material and Antique Brass Color for Wooden Coffin and Casket

Crucifix & Cross

Funeral Crucifix And Cross 8047 in Metal Material and Antique Brass Color for Wooden Coffin and Casket

Ref 8047 Steel And Zinc Alloy (metal) Lifts None, decoration only MOQ 2000pcs

A metal crucifix for a wooden coffin is a common religious symbol used in Christian burials. It typically consists of a metal cross adorned with a depiction of Jesus Christ. These crucifixes can vary in size, design, and material, but they are usually made of metals such as brass, stainless steel, or silver.

Request A Quote Request A Sample Email Us

Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.

Material

Steel And Zinc Alloy (metal)

Lift weight

None, decoration only

MOQ

2000pcs

Lead time

40days

Key Benefits

Why This Model Is Specified

Tested Lift Weight

This model is rated at None, decoration only. Load bearing models are checked on our own lift weight rig rather than quoted from a catalogue.

Zamak #3 Casting

Die cast in Zamak #3, which holds fine ornament detail and stays dimensionally stable, so the hundredth piece matches the first.

Steel Where It Carries Load

A steel bar or steel core carries the bearing load while the casting or moulding carries the appearance.

Finish Options

Available in Antique Brass, Gold, Chrome or Antique Copper. The approved tone is recorded so a repeat order matches the first one.

Hand Polished Before Finishing

Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.

Made On Our Own Tooling

The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.

Application Scenarios

Where It Is Used

  • Coffin and casket lid decoration
  • Interior placement inside the casket
  • Name plates and memorial plaques
  • Cross and crucifix fixed to tombstones and monuments

Who It Is For

Buyers Who Specify This Item

  • Coffin and casket manufacturers
  • Funeral hardware importers and wholesalers
  • Funeral homes and funeral directors
  • Traders and buying offices sourcing funeral hardware from China

Problems It Solves

What Goes Wrong Without It

  • Fittings sold without a stated load figure. This one is rated at None, decoration only per piece.
  • Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
  • Waiting on a supplier who has to sub-contract the tooling before anything can be made.
  • Small parts that no factory wants to quote because the volume is modest.

Not sure this is the right reference?

Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.

Talk To An Engineer

Technical Features

Specification Summary

Technical features of Funeral Crucifix And Cross 8047 in Metal Material and Antique Brass Color for Wooden Coffin and Casket
MaterialSteel And Zinc Alloy (metal)
Finish optionsAntique Brass, Gold, Chrome or Antique Copper
Size45*18cm
Rated lift weightNone, decoration only

Specifications

Full Specification Table

Full specification of Funeral Crucifix And Cross 8047 in Metal Material and Antique Brass Color for Wooden Coffin and Casket
Ref No.8047
MaterialSteel And Zinc Alloy (metal)
Size45*18cm
ColorAntique Brass, Gold, Chrome or Antique Copper
Lift weightNone, decoration only
Minimum Order Qty2000pcs
Lead Time40days

Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.

Materials And Manufacturing Process

How This Item Is Produced

Material for this reference is Steel And Zinc Alloy (metal).

Tooling

The die is cut and trialled in our own workshop.

Die casting

Zamak #3 is die cast on our casting machines.

Hand polishing

Every casting is hand polished before it reaches the plating line.

Electroplating

Gold, nickel, antique brass, antique copper or chrome.

Assembly and packing

Bars, caps and screws are matched, then counted and packed.

Read the full process guide
Zamak die casting machine in operation at the Virtue Hardware factory in Wenzhou
Zamak die casting machine in operation at the Virtue Hardware factory in Wenzhou

Quality Control

What We Check Before Packing

  • Incoming material is checked before it goes into the casting or moulding cell.
  • Castings and mouldings are inspected in process, not only at the end of the line.
  • Load bearing models are checked on our own lift weight test rig.
  • Plating and coating tone is compared against the approved reference sample.
  • Counting and packing are checked before the carton is closed.

Documents

What Can Travel With The Order

Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.

Customization Options

What Can Be Changed

  • Finish and tone, agreed against a physical reference sample rather than a colour name.
  • Bar length and screw specification, cut to the coffin size you actually build.
  • Packing format, including packing by the set so one carton serves one coffin.
  • Dimensional changes to an existing design where the tooling allows it.
  • Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Custom mould development

Comparison With Other Products

How It Compares

Comparison of Funeral Crucifix And Cross 8047 in Metal Material and Antique Brass Color for Wooden Coffin and Casket with alternatives
This modelDie cast in Steel And Zinc Alloy (metal), hand polished and electroplated, rated at None, decoration only.
Metallized plastic equivalentLower unit cost and lighter, suited to cremation coffins, with a coated rather than plated finish.
Stamped steel fittingCheaper again but flatter in profile, with far less ornament detail available.

Use Guide

Fitting And Handling Notes

  • Mark the centre line of the lid first and set the piece out from that line, not from an edge.
  • Use the screw size stated in the specification. A longer screw can break through a thin lid panel.
  • Drill a pilot hole in hardwood. Driving straight into hardwood can split the panel or strip the casting.
  • Fit decoration after the coffin is polished, so polish and wax do not build up around the ornament.
  • Where the piece will be fixed outdoors on stone, ask for the stainless or brass version instead.
Full installation guide

Related Products

More From Crucifix & Cross

View all 29

Related Applications

Who Buys This And Why

Industry

Coffin & Casket Manufacturers

Container volume hardware with repeatable plating and matched sets for the assembly bench...

Industry

Funeral Homes & Directors

Hardware you can rely on during a service and hold as spares for repairs and refurbishment...

Industry

Importers & Distributors

A full programme from one factory so a container carries handles crucifix corners and urns together...

Industry

Cremation Providers

Light metallized fittings for coffins that will be cremated and urns for what comes after...

Related Articles

Background Reading

Material Guide

Coffin Hardware Materials Compared

Zamak, steel, stainless steel, brass, aluminium, ABS and PP for coffin handles, crucifix and casket fittings —...

Process Guide

How Coffin Handles Are Made

The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...

Design Guide

Choosing A Finish For Coffin Hardware

Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...

Installation Guide

Fitting Coffin Handles And Decoration

Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...

Download the Metal Crucifix & Fittings catalogue

Every reference in this range with images and specifications, as a PDF.

Download PDF Download center

Questions

Questions About This Product

What is the minimum order quantity for this item?
The minimum order quantity for reference 8047 is 2000pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 40days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Which finishes are available?
This item is produced in Antique Brass, Gold, Chrome or Antique Copper. We agree the tone against a physical sample rather than a colour name, and keep that reference so a repeat order starts from the same point.
What does the lift weight rating mean?
It is the load one piece is rated to carry, None, decoration only in this case. Divide the loaded coffin weight by that figure to work out how many pieces the coffin needs, then add margin. Load bearing models are checked on our own lift weight test rig.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.

Next Step

Get A Price For This Reference

Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.

Request A Quote Request A Sample Email Us

WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244