8039Crucifix & Cross
Funeral Coffin And Casket Crucifix 8039 Metal Decoration And Coffin Lid Decoration
Zinc Alloy
Home / Products / Metal Crucifix & Fittings / Crucifix & Cross / Double Steel Wire 6mm Metal Cross 8041 Funeral Coffin...
Crucifix & Cross
Double Steel Wire 6mm Metal Cross 8041 Funeral Coffin Decoration
Ref 8041
Steel (iron) 6mm
MOQ 2000pcs
Flat cross for coffin lid, gold color and good decoration, coffin and casket ornament, coffin decoration, gold color for European coffin, metal cross, crucifix and cross, coffin ornament
The metal cross 8041 is made of double steel wire 6mm, by welding and polish and plated into different color.
Simple design for coffin lid decoration, it will be flat cross without jesus, which can be gold, antique brass or antique copper color.
Competitive Advantage: High polished, high quality and competitive price
Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.
Material
Steel (iron) 6mm
Lift weight
Decoration
MOQ
2000pcs
Lead time
30days
Key Benefits
Why This Model Is Specified
Steel Where It Carries Load
A steel bar or steel core carries the bearing load while the casting or moulding carries the appearance.
Finish Options
Available in Gold, Antique Brass or Antique Copper. The approved tone is recorded so a repeat order matches the first one.
Hand Polished Before Finishing
Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.
Made On Our Own Tooling
The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.
Application Scenarios
Where It Is Used
- Coffin and casket lid decoration
- Interior placement inside the casket
- Name plates and memorial plaques
- Cross and crucifix fixed to tombstones and monuments
Who It Is For
Buyers Who Specify This Item
- Coffin and casket manufacturers
- Funeral hardware importers and wholesalers
- Funeral homes and funeral directors
- Traders and buying offices sourcing funeral hardware from China
Problems It Solves
What Goes Wrong Without It
- Decoration that does not match the handles already fitted to the coffin.
- Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
- Waiting on a supplier who has to sub-contract the tooling before anything can be made.
- Small parts that no factory wants to quote because the volume is modest.
Not sure this is the right reference?
Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.
Talk To An EngineerTechnical Features
Specification Summary
| Material | Steel (iron) 6mm |
|---|---|
| Production route | Cutting, welding, polish and electronic plating |
| Finish options | Gold, Antique Brass or Antique Copper |
| Size | 57*18 |
Specifications
Full Specification Table
| Ref No. | 8041 |
|---|---|
| Production Route | Cutting, welding, polish and electronic plating |
| Material | Steel (iron) 6mm |
| Size | 57*18 |
| Finish | Gold, Antique Brass or Antique Copper |
| MOQ | 2000pcs |
| Lead Time | 30days |
Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.
Materials And Manufacturing Process
How This Item Is Produced
Material for this reference is Steel (iron) 6mm. The stated production route is Cutting, welding, polish and electronic plating.
Tooling
The die is cut and trialled in our own workshop.
Die casting
Zamak #3 is die cast on our casting machines.
Hand polishing
Every casting is hand polished before it reaches the plating line.
Electroplating
Gold, nickel, antique brass, antique copper or chrome.
Assembly and packing
Bars, caps and screws are matched, then counted and packed.
Quality Control
What We Check Before Packing
- Incoming material is checked before it goes into the casting or moulding cell.
- Castings and mouldings are inspected in process, not only at the end of the line.
- Load bearing models are checked on our own lift weight test rig.
- Plating and coating tone is compared against the approved reference sample.
- Counting and packing are checked before the carton is closed.
Documents
What Can Travel With The Order
Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.
Customization Options
What Can Be Changed
- Finish and tone, agreed against a physical reference sample rather than a colour name.
- Bar length and screw specification, cut to the coffin size you actually build.
- Packing format, including packing by the set so one carton serves one coffin.
- Dimensional changes to an existing design where the tooling allows it.
- Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Comparison With Other Products
How It Compares
| This model | Die cast in Steel (iron) 6mm, hand polished and electroplated, rated at not rated. |
|---|---|
| Metallized plastic equivalent | Lower unit cost and lighter, suited to cremation coffins, with a coated rather than plated finish. |
| Stamped steel fitting | Cheaper again but flatter in profile, with far less ornament detail available. |
Use Guide
Fitting And Handling Notes
- Mark the centre line of the lid first and set the piece out from that line, not from an edge.
- Use the screw size stated in the specification. A longer screw can break through a thin lid panel.
- Drill a pilot hole in hardwood. Driving straight into hardwood can split the panel or strip the casting.
- Fit decoration after the coffin is polished, so polish and wax do not build up around the ornament.
- Where the piece will be fixed outdoors on stone, ask for the stainless or brass version instead.
Related Products
More From Crucifix & Cross
8040Crucifix & Cross
Funeral Crucifix And Cross 8040 in Zinc Alloy material and Gold Plating, Coffin Decorations and Fittings
Zinc Alloy
8042Crucifix & Cross
Metal Crucifix 8042 Funeral Coffin Decoration in Gold Plated Color
Steel (iron) 6mm with Zamak Christ
8047Crucifix & Cross
Funeral Crucifix And Cross 8047 in Metal Material and Antique Brass Color for Wooden Coffin and Casket
Steel And Zinc Alloy (metal) · lifts None, decoration only
8047ACCrucifix & Cross
Antique Copper Metal Crucifix with Jesus 8047AC for Wooden Coffin and Casket Lid Decoration Cross
Steel And Zinc Alloy (metal) · lifts None, decoration only
8048Crucifix & Cross
Italy Wooden Coffin Ornament And Decoration 8048 Metal Crucifix size in 53*16cm and Well Polished
Zinc Alloy (metal) · lifts Nill
8051Crucifix & Cross
Zamak Metal Funeral Casket Cross Supplier Funeral Accessories 8051 Christ Cruces Jesus Cross And Crucifix
Zinc Alloy (metal)
8053Crucifix & Cross
Metal Crucifix 8053 Size 56x17cm For Italy Coffin and Casket Decoration
Zinc Alloy (metal) & Steel (Iron)
Related Applications
Who Buys This And Why
Industry
Coffin & Casket Manufacturers
Container volume hardware with repeatable plating and matched sets for the assembly bench...
Industry
Funeral Homes & Directors
Hardware you can rely on during a service and hold as spares for repairs and refurbishment...
Industry
Importers & Distributors
A full programme from one factory so a container carries handles crucifix corners and urns together...
Industry
Cremation Providers
Light metallized fittings for coffins that will be cremated and urns for what comes after...
Related Articles
Background Reading
Material Guide
Coffin Hardware Materials Compared
Zamak, steel, stainless steel, brass, aluminium, ABS and PP for coffin handles, crucifix and casket fittings —...
Process Guide
How Coffin Handles Are Made
The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...
Design Guide
Choosing A Finish For Coffin Hardware
Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...
Installation Guide
Fitting Coffin Handles And Decoration
Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...
Download the Metal Crucifix & Fittings catalogue
Every reference in this range with images and specifications, as a PDF.
Questions
Questions About This Product
What is the minimum order quantity for this item?
The minimum order quantity for reference 8041 is 2000pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 30days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Which finishes are available?
This item is produced in Gold, Antique Brass or Antique Copper. We agree the tone against a physical sample rather than a colour name, and keep that reference so a repeat order starts from the same point.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.
Next Step
Get A Price For This Reference
Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.
WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244