8001Crucifix & Cross
Metal crucifix 8001, metal cross with jesus, zamak crucifix for coffin lid decoration
Zamak #3
Home / Products / Metal Crucifix & Fittings / Crucifix & Cross / Metal Crucifix 8001E Funeral products for Wooden Coffin...
Crucifix & Cross
Metal Crucifix 8001E Funeral products for Wooden Coffin Decoration in Competitive Price
Ref 8001E
Steel and Aluminum alloy
MOQ 2000pcs
This metal crucifix 8001E is used in coffin lid, which is part of coffin decoration, it can be gold, antique brass or antique copper color. It made of steel (iron) cross with aluminum alloy Chirst, it’s famous in European market.
Metal crucifix, metal cross with jesus, zamak crucifix for coffin lid decoration, metal ornament, metal decoration for coffin and casket
Competitive Advantage: High polished, high quality and competitive price
A metal crucifix is a cross with a representation of Jesus’ body, known as the corpus, affixed to it. Crucifixes play an important role in many Christian denominations, particularly in Catholicism, Eastern Orthodoxy, and some branches of Anglicanism and Lutheranism.
Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.
Material
Steel and Aluminum alloy
Lift weight
Decoration
MOQ
2000pcs
Lead time
35days
Key Benefits
Why This Model Is Specified
Steel Where It Carries Load
A steel bar or steel core carries the bearing load while the casting or moulding carries the appearance.
Finish Options
Available in Gold, Antique Brass or Antique Copper. The approved tone is recorded so a repeat order matches the first one.
Hand Polished Before Finishing
Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.
Made On Our Own Tooling
The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.
Application Scenarios
Where It Is Used
- Coffin and casket lid decoration
- Interior placement inside the casket
- Name plates and memorial plaques
- Cross and crucifix fixed to tombstones and monuments
Who It Is For
Buyers Who Specify This Item
- Coffin and casket manufacturers
- Funeral hardware importers and wholesalers
- Funeral homes and funeral directors
- Traders and buying offices sourcing funeral hardware from China
Problems It Solves
What Goes Wrong Without It
- Decoration that does not match the handles already fitted to the coffin.
- Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
- Waiting on a supplier who has to sub-contract the tooling before anything can be made.
- Small parts that no factory wants to quote because the volume is modest.
Not sure this is the right reference?
Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.
Talk To An EngineerTechnical Features
Specification Summary
| Material | Steel and Aluminum alloy |
|---|---|
| Production route | Die casting, polish and electronic plating |
| Finish options | Gold, Antique Brass or Antique Copper |
| Size | 45*18cm |
| Cross diameter | 6*6mm square |
Specifications
Full Specification Table
| Ref No. | 8001E |
|---|---|
| Production Route | Die casting, polish and electronic plating |
| Material | Steel and Aluminum alloy |
| Size | 45*18cm |
| Cross diameter | 6*6mm square |
| Finish | Gold, Antique Brass or Antique Copper |
| MOQ | 2000pcs |
| Lead Time | 35days |
Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.
Materials And Manufacturing Process
How This Item Is Produced
Material for this reference is Steel and Aluminum alloy. The stated production route is Die casting, polish and electronic plating.
Tooling
The die is cut and trialled in our own workshop.
Die casting
Zamak #3 is die cast on our casting machines.
Hand polishing
Every casting is hand polished before it reaches the plating line.
Electroplating
Gold, nickel, antique brass, antique copper or chrome.
Assembly and packing
Bars, caps and screws are matched, then counted and packed.
Quality Control
What We Check Before Packing
- Incoming material is checked before it goes into the casting or moulding cell.
- Castings and mouldings are inspected in process, not only at the end of the line.
- Load bearing models are checked on our own lift weight test rig.
- Plating and coating tone is compared against the approved reference sample.
- Counting and packing are checked before the carton is closed.
Documents
What Can Travel With The Order
Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.
Customization Options
What Can Be Changed
- Finish and tone, agreed against a physical reference sample rather than a colour name.
- Bar length and screw specification, cut to the coffin size you actually build.
- Packing format, including packing by the set so one carton serves one coffin.
- Dimensional changes to an existing design where the tooling allows it.
- Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Comparison With Other Products
How It Compares
| This model | Die cast in Steel and Aluminum alloy, hand polished and electroplated, rated at not rated. |
|---|---|
| Metallized plastic equivalent | Lower unit cost and lighter, suited to cremation coffins, with a coated rather than plated finish. |
| Stamped steel fitting | Cheaper again but flatter in profile, with far less ornament detail available. |
Use Guide
Fitting And Handling Notes
- Mark the centre line of the lid first and set the piece out from that line, not from an edge.
- Use the screw size stated in the specification. A longer screw can break through a thin lid panel.
- Drill a pilot hole in hardwood. Driving straight into hardwood can split the panel or strip the casting.
- Fit decoration after the coffin is polished, so polish and wax do not build up around the ornament.
- Where the piece will be fixed outdoors on stone, ask for the stainless or brass version instead.
Related Products
More From Crucifix & Cross
Related Applications
Who Buys This And Why
Industry
Coffin & Casket Manufacturers
Container volume hardware with repeatable plating and matched sets for the assembly bench...
Industry
Funeral Homes & Directors
Hardware you can rely on during a service and hold as spares for repairs and refurbishment...
Industry
Importers & Distributors
A full programme from one factory so a container carries handles crucifix corners and urns together...
Industry
Cremation Providers
Light metallized fittings for coffins that will be cremated and urns for what comes after...
Related Articles
Background Reading
Material Guide
Coffin Hardware Materials Compared
Zamak, steel, stainless steel, brass, aluminium, ABS and PP for coffin handles, crucifix and casket fittings —...
Process Guide
How Coffin Handles Are Made
The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...
Design Guide
Choosing A Finish For Coffin Hardware
Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...
Installation Guide
Fitting Coffin Handles And Decoration
Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...
Download the Metal Crucifix & Fittings catalogue
Every reference in this range with images and specifications, as a PDF.
Questions
Questions About This Product
What is the minimum order quantity for this item?
The minimum order quantity for reference 8001E is 2000pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 35days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Which finishes are available?
This item is produced in Gold, Antique Brass or Antique Copper. We agree the tone against a physical sample rather than a colour name, and keep that reference so a repeat order starts from the same point.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.
Next Step
Get A Price For This Reference
Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.
WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244