Virtue Hardware Co., Ltd logo
Home / Products / Plastic Handle / Reinforced Handle / Funeral handle supplier, plastic with steel wire 9506
Funeral handle supplier, plastic with steel wire 9506

Reinforced Handle

Funeral handle supplier, plastic with steel wire 9506

Ref 9506 PP recycle and steel wire Lifts 35kg/pc MOQ 1000pcs

Funeral handle supplier, plastic with steel wire 9506, funeral handle supplier, plastic handle for casket, coffin handle in plastic

The 9506 handle is made by steel wire inside and plastic covered, it can lift the wight 35k/pc, the color will be gold, silver or copper.

Tag : funeral handle supplier, plastic handle for coffin and casket

Request A Quote Request A Sample Email Us

Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.

Material

PP recycle and steel wire

Lift weight

35kg/pc

MOQ

1000pcs

Lead time

30days

Key Benefits

Why This Model Is Specified

Tested Lift Weight

This model is rated at 35kg/pc. Load bearing models are checked on our own lift weight rig rather than quoted from a catalogue.

Steel Where It Carries Load

A steel bar or steel core carries the bearing load while the casting or moulding carries the appearance.

Light And Low Cost

Injection moulded and vacuum metallized, so the piece reads as metal at a fraction of the weight and unit cost.

Finish Options

Available in Gold, Silver or Copper. The approved tone is recorded so a repeat order matches the first one.

Hand Polished Before Finishing

Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.

Made On Our Own Tooling

The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.

Application Scenarios

Where It Is Used

  • Cremation coffins in chipboard MDF or veneer
  • Economy burial coffins for high volume programmes
  • Rental and ceremonial coffins where weight matters
  • Export ranges where freight cost per unit is critical

Who It Is For

Buyers Who Specify This Item

  • Cremation coffin manufacturers
  • Producers of economy and mid range coffins
  • Funeral hardware importers and wholesalers
  • Funeral homes and funeral directors

Problems It Solves

What Goes Wrong Without It

  • Fittings sold without a stated load figure. This one is rated at 35kg/pc per piece.
  • Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
  • Waiting on a supplier who has to sub-contract the tooling before anything can be made.
  • Cast metal cost on a coffin that will be cremated within days of delivery.

Not sure this is the right reference?

Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.

Talk To An Engineer

Technical Features

Specification Summary

Technical features of Funeral handle supplier, plastic with steel wire 9506
MaterialPP recycle and steel wire
Production routeInjection by mould and Vacuum metalization coating
Finish optionsGold, Silver or Copper
Size30.5*5.1cm
Rated lift weight35kg/pc

Specifications

Full Specification Table

Full specification of Funeral handle supplier, plastic with steel wire 9506
Ref No.9506
Lift weight35kg/pc
Production RouteInjection by mould and Vacuum metalization coating
MaterialPP recycle and steel wire
Size30.5*5.1cm
FinishGold, Silver or Copper
MOQ1000pcs
Lead Time30days

Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.

Materials And Manufacturing Process

How This Item Is Produced

Material for this reference is PP recycle and steel wire. The stated production route is Injection by mould and Vacuum metalization coating.

Tooling

The mould is cut and trialled in our own workshop.

Injection

ABS or PP is injection moulded to the mould form.

Vacuum metallizing

A metal layer is deposited under vacuum.

Colour coating

Gold, silver, copper or bronze tone is coated over the metallized layer.

Inspection and packing

Pieces are checked for coating defects, counted and packed.

Read the full process guide
Recycled and new ABS and PP raw material at the Virtue Hardware factory
Recycled and new ABS and PP raw material at the Virtue Hardware factory

Quality Control

What We Check Before Packing

  • Incoming material is checked before it goes into the casting or moulding cell.
  • Castings and mouldings are inspected in process, not only at the end of the line.
  • Load bearing models are checked on our own lift weight test rig.
  • Plating and coating tone is compared against the approved reference sample.
  • Counting and packing are checked before the carton is closed.

Documents

What Can Travel With The Order

Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.

Customization Options

What Can Be Changed

  • Finish and tone, agreed against a physical reference sample rather than a colour name.
  • Bar length and screw specification, cut to the coffin size you actually build.
  • Packing format, including packing by the set so one carton serves one coffin.
  • Dimensional changes to an existing design where the tooling allows it.
  • Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Custom mould development

Comparison With Other Products

How It Compares

Comparison of Funeral handle supplier, plastic with steel wire 9506 with alternatives
This modelInjection moulded and vacuum metallized. Light, low unit cost, rated at 35kg/pc.
Cast zamak equivalentHeavier and more expensive per piece, with sharper cast detail and a plated rather than coated finish.
Unreinforced plasticLower cost again but decorative only. Not suitable where the piece has to carry weight.

Use Guide

Fitting And Handling Notes

  • Set out the handle positions along the coffin side and mark all screw holes before driving anything.
  • Drill pilot holes in hardwood. Chipboard and MDF need the correct screw type or the thread will strip.
  • Use the screw size stated in the specification. Too long and it breaks through the inside face.
  • Tighten evenly across both fixing points rather than fully seating one side first.
  • For a movable handle, check the bar swings and returns freely before the coffin leaves the bench.
  • Never rely on fewer handles than the coffin weight calls for. Divide the loaded weight by the rated lift weight and add margin.
Full installation guide

Related Products

More From Reinforced Handle

View all 20

Related Applications

Who Buys This And Why

Industry

Coffin & Casket Manufacturers

Container volume hardware with repeatable plating and matched sets for the assembly bench...

Industry

Funeral Homes & Directors

Hardware you can rely on during a service and hold as spares for repairs and refurbishment...

Industry

Importers & Distributors

A full programme from one factory so a container carries handles crucifix corners and urns together...

Industry

Cremation Providers

Light metallized fittings for coffins that will be cremated and urns for what comes after...

Related Articles

Background Reading

Buying Guide

How To Choose Coffin Handles

Fixed handles, movable swing handles, long handle bars and complete handle sets compared by load, assembly tim...

Process Guide

How Coffin Handles Are Made

The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...

Design Guide

Choosing A Finish For Coffin Hardware

Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...

Installation Guide

Fitting Coffin Handles And Decoration

Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...

Download the Plastic Handle catalogue

Every reference in this range with images and specifications, as a PDF.

Download PDF Download center

Questions

Questions About This Product

What is the minimum order quantity for this item?
The minimum order quantity for reference 9506 is 1000pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 30days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Which finishes are available?
This item is produced in Gold, Silver or Copper. We agree the tone against a physical sample rather than a colour name, and keep that reference so a repeat order starts from the same point.
What does the lift weight rating mean?
It is the load one piece is rated to carry, 35kg/pc in this case. Divide the loaded coffin weight by that figure to work out how many pieces the coffin needs, then add margin. Load bearing models are checked on our own lift weight test rig.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.

Next Step

Get A Price For This Reference

Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.

Request A Quote Request A Sample Email Us

WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244