Funeral Urn
Bule And Green color With White Flash Point Funeral Ash Urn For Cremation Products
Ref PA005-2
ABS new
MOQ 1008pcs
The Ash Urn PA005-2 is a type of plastic urn or holder for the human ash, the capacity is 3.3L, and it made of ABS plastic material, the basic color: blue, grey, bordeaux or black, the other color can be customized.
The height is 23cm and diameter is 16.5cm, with the inner cap and outer cap.
1, Blue and Green Color with White Flash Point Funeral Ash Urn Primary Colors: The urn features blue and green tones, which could symbolize calmness, tranquility, nature, and renewal, making them appropriate for honoring a loved one in a respectful and peaceful manner.
2, White Flash Point Design: The white flash points could refer to unique patterns or highlights of white color that may appear to “flash” or create a striking contrast against the blue and green base. This effect could be achieved through the glaze or the method of coloring, giving the urn a more dynamic, artistic appearance.
Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.
Material
ABS new
Lift weight
Decoration
MOQ
1008pcs
Lead time
30days
Key Benefits
Why This Model Is Specified
Light And Low Cost
Injection moulded and vacuum metallized, so the piece reads as metal at a fraction of the weight and unit cost.
Hand Polished Before Finishing
Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.
Made On Our Own Tooling
The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.
Application Scenarios
Where It Is Used
- Adult cremation urns for burial or interment
- Keepsake and companion sizes
- Urns supplied with matched coffin decoration
- Retail memorial display
Who It Is For
Buyers Who Specify This Item
- Crematoria and cremation service providers
- Funeral homes holding urn stock
- Importers of memorial and cremation products
- Retailers of memorial goods
Problems It Solves
What Goes Wrong Without It
- Decoration that does not match the handles already fitted to the coffin.
- Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
- Waiting on a supplier who has to sub-contract the tooling before anything can be made.
- Small parts that no factory wants to quote because the volume is modest.
Not sure this is the right reference?
Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.
Talk To An EngineerTechnical Features
Specification Summary
| Material | ABS new |
|---|---|
| Production route | Injection |
| Size | H23cm x Dia 16.5 |
Specifications
Full Specification Table
| Ref No. | PA005-2 |
|---|---|
| Production Route | Injection |
| Material | ABS new |
| Size | H23cm x Dia 16.5 |
| MOQ | 1008pcs |
| Lead Time | 30days |
Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.
Materials And Manufacturing Process
How This Item Is Produced
Material for this reference is ABS new. The stated production route is Injection.
Tooling
The mould is cut and trialled in our own workshop.
Injection
ABS or PP is injection moulded to the mould form.
Vacuum metallizing
A metal layer is deposited under vacuum.
Colour coating
Gold, silver, copper or bronze tone is coated over the metallized layer.
Inspection and packing
Pieces are checked for coating defects, counted and packed.
Quality Control
What We Check Before Packing
- Incoming material is checked before it goes into the casting or moulding cell.
- Castings and mouldings are inspected in process, not only at the end of the line.
- Load bearing models are checked on our own lift weight test rig.
- Plating and coating tone is compared against the approved reference sample.
- Counting and packing are checked before the carton is closed.
Documents
What Can Travel With The Order
Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.
Customization Options
What Can Be Changed
- Finish and tone, agreed against a physical reference sample rather than a colour name.
- Bar length and screw specification, cut to the coffin size you actually build.
- Packing format, including packing by the set so one carton serves one coffin.
- Dimensional changes to an existing design where the tooling allows it.
- Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Comparison With Other Products
How It Compares
| This urn | Supplied as catalogued, with the stated material and finish. |
|---|---|
| Metal urn | Steel, brass or stainless, spun or pressed and lacquered. Heavier, more durable. |
| ABS urn | Injection moulded and coated. Lighter and lower cost, easier to ship in volume. |
Use Guide
Fitting And Handling Notes
- Check the urn opening and internal volume against the ashes to be held before ordering.
- Handle lacquered and coated urns by the body, not the lid, and keep them in the supplied packing until display.
- Clean with a dry or barely damp soft cloth. Solvents will mark a lacquer or coated finish.
- Where the urn will be interred, confirm the cemetery accepts the material before you commit to a range.
Related Products
More From Funeral Urn
PA004-2Funeral Urn
Black Bule With White Flash Point Color Funeral Ash Urn For Cremation Human Ash Holder
ABS new
PA006-2Funeral Urn
Funeral Ash Urn White Color With Brush Gold Belt In Plastic Material and 3.3L Volume
ABS new
PA007-2Funeral Urn
Cremation Products Funeral Ash Urn and Urne PA007 in Grass Green Color And ABS Plastic material
ABS new
PABLUEFuneral Urn
Cheapest Funeral Ash Urn For Cremation in ABS plastic material and Blue color
ABS new
Related Applications
Who Buys This And Why
Industry
Coffin & Casket Manufacturers
Container volume hardware with repeatable plating and matched sets for the assembly bench...
Industry
Funeral Homes & Directors
Hardware you can rely on during a service and hold as spares for repairs and refurbishment...
Industry
Importers & Distributors
A full programme from one factory so a container carries handles crucifix corners and urns together...
Industry
Cremation Providers
Light metallized fittings for coffins that will be cremated and urns for what comes after...
Related Articles
Background Reading
Material Guide
Coffin Hardware Materials Compared
Zamak, steel, stainless steel, brass, aluminium, ABS and PP for coffin handles, crucifix and casket fittings —...
Process Guide
How Coffin Handles Are Made
The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...
Design Guide
Choosing A Finish For Coffin Hardware
Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...
Installation Guide
Fitting Coffin Handles And Decoration
Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...
Download the Funeral Urn catalogue
Every reference in this range with images and specifications, as a PDF.
Questions
Questions About This Product
What is the minimum order quantity for this item?
The minimum order quantity for reference PA005-2 is 1008pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 30days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.
Next Step
Get A Price For This Reference
Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.
WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244