Home / Products / Metal Handle / Handle Bar / Coffin Handle Bar And Casket Handle 1002-36cm In Various...
Handle Bar
Coffin Handle Bar And Casket Handle 1002-36cm In Various Electronic Plating Color For Funeral Handles
Ref 1002-36cm
Zinc Alloy With Steel Twisted Bar
Lifts 150kgs
MOQ 2000pcs
Customized length extend coffin handle 1002E in antique brass color
Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.
Material
Zinc Alloy With Steel Twisted Bar
Lift weight
150kgs
MOQ
2000pcs
Lead time
40days
Key Benefits
Why This Model Is Specified
Tested Lift Weight
This model is rated at 150kgs. Load bearing models are checked on our own lift weight rig rather than quoted from a catalogue.
Zamak #3 Casting
Die cast in Zamak #3, which holds fine ornament detail and stays dimensionally stable, so the hundredth piece matches the first.
Steel Where It Carries Load
A steel bar or steel core carries the bearing load while the casting or moulding carries the appearance.
Finish Options
Available in Gold, Antique Brass, Antique Copper or Chrome plated. The approved tone is recorded so a repeat order matches the first one.
Hand Polished Before Finishing
Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.
Made On Our Own Tooling
The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.
Application Scenarios
Where It Is Used
- Solid wood and veneered coffins for burial
- Metal and steel caskets with rail or swing bar fittings
- Long side bars on continental style coffins
- Replacement and refurbishment work in funeral homes
Who It Is For
Buyers Who Specify This Item
- Coffin and casket manufacturers
- Funeral hardware importers and wholesalers
- Funeral homes and funeral directors
- Traders and buying offices sourcing funeral hardware from China
Problems It Solves
What Goes Wrong Without It
- Fittings sold without a stated load figure. This one is rated at 150kgs per piece.
- Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
- Waiting on a supplier who has to sub-contract the tooling before anything can be made.
- Small parts that no factory wants to quote because the volume is modest.
Not sure this is the right reference?
Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.
Talk To An EngineerTechnical Features
Specification Summary
| Material | Zinc Alloy With Steel Twisted Bar |
|---|---|
| Finish options | Gold, Antique Brass, Antique Copper or Chrome plated |
| Size | 36x10cm |
| Rated lift weight | 150kgs |
Specifications
Full Specification Table
| Ref No. | 1002-36cm |
|---|---|
| Material | Zinc Alloy With Steel Twisted Bar |
| Size | 36x10cm |
| Color | Gold, Antique Brass, Antique Copper or Chrome plated |
| Lift weight | 150kgs |
| Minimum Order Qty | 2000pcs |
| Lead Time | 40days |
Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.
Materials And Manufacturing Process
How This Item Is Produced
Material for this reference is Zinc Alloy With Steel Twisted Bar.
Tooling
The die is cut and trialled in our own workshop.
Die casting
Zamak #3 is die cast on our casting machines.
Hand polishing
Every casting is hand polished before it reaches the plating line.
Electroplating
Gold, nickel, antique brass, antique copper or chrome.
Assembly and packing
Bars, caps and screws are matched, then counted and packed.
Quality Control
What We Check Before Packing
- Incoming material is checked before it goes into the casting or moulding cell.
- Castings and mouldings are inspected in process, not only at the end of the line.
- Load bearing models are checked on our own lift weight test rig.
- Plating and coating tone is compared against the approved reference sample.
- Counting and packing are checked before the carton is closed.
Documents
What Can Travel With The Order
Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.
Customization Options
What Can Be Changed
- Finish and tone, agreed against a physical reference sample rather than a colour name.
- Bar length and screw specification, cut to the coffin size you actually build.
- Packing format, including packing by the set so one carton serves one coffin.
- Dimensional changes to an existing design where the tooling allows it.
- Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Comparison With Other Products
How It Compares
| This model | Die cast in Zinc Alloy With Steel Twisted Bar, hand polished and electroplated, rated at 150kgs. |
|---|---|
| Metallized plastic equivalent | Lower unit cost and lighter, suited to cremation coffins, with a coated rather than plated finish. |
| Stamped steel fitting | Cheaper again but flatter in profile, with far less ornament detail available. |
Use Guide
Fitting And Handling Notes
- Set out the handle positions along the coffin side and mark all screw holes before driving anything.
- Drill pilot holes in hardwood. Chipboard and MDF need the correct screw type or the thread will strip.
- Use the screw size stated in the specification. Too long and it breaks through the inside face.
- Tighten evenly across both fixing points rather than fully seating one side first.
- For a movable handle, check the bar swings and returns freely before the coffin leaves the bench.
- Never rely on fewer handles than the coffin weight calls for. Divide the loaded weight by the rated lift weight and add margin.
Related Products
More From Handle Bar
1002Handle Bar
Funeral Coffin and Casket handle 1002 with Tiwisted Steel Pipe
Zamak #3 with Steel Bar (Dia. 22mm) · lifts 150kg/pc
1002EHandle Bar
Customized length extend coffin handle 1002E in antique brass color
Zamak #3 with Steel Bar (Dia. 22mm) · lifts 200kg/pc
1003Handle Bar
Funeral Swing Bar 1003 For Coffin and Casket Handle in Zamac material with Steel bar
Zamak #3 with Steel Bar (Dia. 22mm) · lifts 150kg/pc
1003-2Handle Bar
Funeral Coffin Handle with Twisted Steel Bar 1003-2 coffin fittings
Zamak #3 with Steel Bar (Dia. 22mm) · lifts 150kg/pc
1003EHandle Bar
Long Bar Handle for Coffin and Casket 1003E in Customized Length by Electronic Plated to Gold or Antique Color
Zinc Alloy (metal) + Steel bar · lifts 150kgs/pc
1004Handle Bar
Metal Coffin Handle 1004 in different size and gold or antique brass plating
Zamak #3 with Steel Bar (Dia. 22mm) · lifts 150kg/pc
1004-1.8MHandle Bar
Funeral supplier and long bar handle for wooden coffin and casekt 1004-1.8M in Antique brass plated with customized length
metal · lifts 150kgs
Related Applications
Who Buys This And Why
Industry
Coffin & Casket Manufacturers
Container volume hardware with repeatable plating and matched sets for the assembly bench...
Industry
Funeral Homes & Directors
Hardware you can rely on during a service and hold as spares for repairs and refurbishment...
Industry
Importers & Distributors
A full programme from one factory so a container carries handles crucifix corners and urns together...
Industry
Cremation Providers
Light metallized fittings for coffins that will be cremated and urns for what comes after...
Related Articles
Background Reading
Buying Guide
How To Choose Coffin Handles
Fixed handles, movable swing handles, long handle bars and complete handle sets compared by load, assembly tim...
Process Guide
How Coffin Handles Are Made
The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...
Design Guide
Choosing A Finish For Coffin Hardware
Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...
Installation Guide
Fitting Coffin Handles And Decoration
Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...
Download the Metal Handle catalogue
Every reference in this range with images and specifications, as a PDF.
Questions
Questions About This Product
What is the minimum order quantity for this item?
The minimum order quantity for reference 1002-36cm is 2000pcs. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 40days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Which finishes are available?
This item is produced in Gold, Antique Brass, Antique Copper or Chrome plated. We agree the tone against a physical sample rather than a colour name, and keep that reference so a repeat order starts from the same point.
What does the lift weight rating mean?
It is the load one piece is rated to carry, 150kgs in this case. Divide the loaded coffin weight by that figure to work out how many pieces the coffin needs, then add margin. Load bearing models are checked on our own lift weight test rig.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.
Next Step
Get A Price For This Reference
Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.
WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244