Virtue Hardware Co., Ltd logo
Home / Products / Casket Corner & Swing Bar / Casket Corner / Big flower design casket corner 2220 in high quality
Big flower design casket corner 2220 in high quality

Casket Corner

Big flower design casket corner 2220 in high quality

Ref 2220 PP or ABS with steel bar Lifts 200kg/pcs MOQ 100sets

Big flower design casket corner 2220 in high quality, casket decoration, casket decoration

The casket corner 2220 is flower design, the plastic and corner and lugs, with two piece of long bar and two piece short bar to be set. The color can be gold, silver or Bronze.

Request A Quote Request A Sample Email Us

Drawings and reference photos are welcome on WhatsApp or by email. We do not use web forms.

Material

PP or ABS with steel bar

Lift weight

200kg/pcs

MOQ

100sets

Lead time

30days

Key Benefits

Why This Model Is Specified

Tested Lift Weight

This model is rated at 200kg/pcs. Load bearing models are checked on our own lift weight rig rather than quoted from a catalogue.

Steel Where It Carries Load

A steel bar or steel core carries the bearing load while the casting or moulding carries the appearance.

Light And Low Cost

Injection moulded and vacuum metallized, so the piece reads as metal at a fraction of the weight and unit cost.

Finish Options

Available in Gold, Silver or Bronze. The approved tone is recorded so a repeat order matches the first one.

Hand Polished Before Finishing

Plating cannot hide a poor surface, so cast parts are hand polished before they go to the plating line.

Made On Our Own Tooling

The mould is ours and sits in our Wenzhou factory, so a re-order runs from the same tool rather than a copy.

Application Scenarios

Where It Is Used

  • Full length swing bar casket hardware
  • Corner decoration on wooden and metal caskets
  • Matched sets of corner, bar and lid fittings
  • Refurbishment of existing casket ranges

Who It Is For

Buyers Who Specify This Item

  • American style casket manufacturers
  • Coffin factories adding a swing bar range
  • Funeral hardware importers and wholesalers
  • Funeral homes and funeral directors

Problems It Solves

What Goes Wrong Without It

  • Fittings sold without a stated load figure. This one is rated at 200kg/pcs per piece.
  • Plating tone that drifts between orders so a re-order will not sit next to earlier stock.
  • Waiting on a supplier who has to sub-contract the tooling before anything can be made.
  • Small parts that no factory wants to quote because the volume is modest.

Not sure this is the right reference?

Send a photo of the fitting you are trying to match on WhatsApp and we will identify the closest reference in our catalogue.

Talk To An Engineer

Technical Features

Specification Summary

Technical features of Big flower design casket corner 2220 in high quality
MaterialPP or ABS with steel bar
Production routeInjection and vacuum metalization coating
Finish optionsGold, Silver or Bronze
Rated lift weight200kg/pcs
Long bar length2.02m
Short bar length0.66m

Specifications

Full Specification Table

Full specification of Big flower design casket corner 2220 in high quality
Ref No.2220
Lift weight200kg/pcs
Production RouteInjection and vacuum metalization coating
MaterialPP or ABS with steel bar
Long bar length2.02m
Short bar length0.66m
FinishGold, Silver or Bronze
MOQ100sets
Lead Time30days

Figures are taken from our production specification for this reference. Where a value is not listed we would rather leave it blank than estimate it, so please ask and we will confirm from the factory.

Materials And Manufacturing Process

How This Item Is Produced

Material for this reference is PP or ABS with steel bar. The stated production route is Injection and vacuum metalization coating.

Tooling

The mould is cut and trialled in our own workshop.

Injection

ABS or PP is injection moulded to the mould form.

Vacuum metallizing

A metal layer is deposited under vacuum.

Colour coating

Gold, silver, copper or bronze tone is coated over the metallized layer.

Inspection and packing

Pieces are checked for coating defects, counted and packed.

Read the full process guide
Recycled and new ABS and PP raw material at the Virtue Hardware factory
Recycled and new ABS and PP raw material at the Virtue Hardware factory

Quality Control

What We Check Before Packing

  • Incoming material is checked before it goes into the casting or moulding cell.
  • Castings and mouldings are inspected in process, not only at the end of the line.
  • Load bearing models are checked on our own lift weight test rig.
  • Plating and coating tone is compared against the approved reference sample.
  • Counting and packing are checked before the carton is closed.

Documents

What Can Travel With The Order

Packing list, material description and the lift weight test record for load bearing models can be issued with the shipment. Ask before the order is confirmed so the paperwork is prepared in time.

Customization Options

What Can Be Changed

  • Finish and tone, agreed against a physical reference sample rather than a colour name.
  • Bar length and screw specification, cut to the coffin size you actually build.
  • Packing format, including packing by the set so one carton serves one coffin.
  • Dimensional changes to an existing design where the tooling allows it.
  • Completely new designs tooled from a drawing, a sample or a photograph and held for your account.
Custom mould development

Comparison With Other Products

How It Compares

Comparison of Big flower design casket corner 2220 in high quality with alternatives
This modelDie cast in PP or ABS with steel bar, hand polished and electroplated, rated at 200kg/pcs.
Metallized plastic equivalentLower unit cost and lighter, suited to cremation coffins, with a coated rather than plated finish.
Stamped steel fittingCheaper again but flatter in profile, with far less ornament detail available.

Use Guide

Fitting And Handling Notes

  • Fit the corners first, check the bar swings clean of the casket body, then fix the bar.
  • Both corners on one end must sit at the same height or the bar will bind as it swings.
  • Use the screw size stated in the specification and drill pilot holes in hardwood.
  • Check the swing action with the lid closed before the casket leaves the bench.
Full installation guide

Related Products

More From Casket Corner

View all 24

Related Applications

Who Buys This And Why

Industry

Coffin & Casket Manufacturers

Container volume hardware with repeatable plating and matched sets for the assembly bench...

Industry

Funeral Homes & Directors

Hardware you can rely on during a service and hold as spares for repairs and refurbishment...

Industry

Importers & Distributors

A full programme from one factory so a container carries handles crucifix corners and urns together...

Industry

Cremation Providers

Light metallized fittings for coffins that will be cremated and urns for what comes after...

Related Articles

Background Reading

Material Guide

Coffin Hardware Materials Compared

Zamak, steel, stainless steel, brass, aluminium, ABS and PP for coffin handles, crucifix and casket fittings —...

Process Guide

How Coffin Handles Are Made

The production route for funeral hardware: zamak die casting, hand polishing and electroplating for metal, inj...

Design Guide

Choosing A Finish For Coffin Hardware

Gold, nickel, antique brass, antique copper, chrome and vacuum metallized tones — how to choose a finish and h...

Installation Guide

Fitting Coffin Handles And Decoration

Practical fitting notes for coffin handles, handle bars, crucifix, corners and swing bars — screw choice, spac...

Download the Casket Corner & Swing Bar catalogue

Every reference in this range with images and specifications, as a PDF.

Download PDF Download center

Questions

Questions About This Product

What is the minimum order quantity for this item?
The minimum order quantity for reference 2220 is 100sets. Minimums vary by product because the tooling and the plating batch size differ, so please confirm with our sales team before you plan an order.
How long is the lead time?
Lead time for this item is 30days after the order is confirmed. We sometimes hold stock, so if you need goods urgently it is worth asking before you assume the full lead time applies.
Which finishes are available?
This item is produced in Gold, Silver or Bronze. We agree the tone against a physical sample rather than a colour name, and keep that reference so a repeat order starts from the same point.
What does the lift weight rating mean?
It is the load one piece is rated to carry, 200kg/pcs in this case. Divide the loaded coffin weight by that figure to work out how many pieces the coffin needs, then add margin. Load bearing models are checked on our own lift weight test rig.
Can I get a sample before placing a bulk order?
Yes. We can provide samples for most of our products. Contact the sales team to discuss the details and the cost of the sample.
Can this design be customised?
Yes. We develop our own moulds at the Wenzhou factory, so size, finish and detail changes are possible, and completely new designs can be tooled from a drawing, a sample or a photograph.
Do you ship internationally?
Yes, we ship worldwide, FCL or LCL. Most of our production goes to Europe. Contact the sales department for freight cost and transit time to your location.

Next Step

Get A Price For This Reference

Send the reference number and the quantity you need. We will come back with unit price, minimum order quantity, lead time and the finish options for this model.

Request A Quote Request A Sample Email Us

WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244