8072Metal Ornament
Metal Lid Key for Wooden Coffin 8072 by Various Color and Coffin Lid Decoration
Zinc Alloy (Zamak)
Coffin Handles · Crucifix · Casket Fittings · Funeral Urns
Funeral Hardware Built To Be Lifted Not Just Looked At
We die cast, polish, plate and load test coffin handles, crucifix and casket fittings in our own Wenzhou factory, so coffin makers and importers get the same tone and the same rated lift weight on the tenth order as on the first.
- In the trade since
- 2007
- Own factory since
- 2016
- Catalogue references
- 312
- Main export market
- Europe
What We Make
Coffin And Casket Hardware
Handles in metal and plastic, crucifix and cross, casket fittings, corners, swing bars, applied ornament, name plates and funeral urns. 312 references across 7 ranges.
Who We Serve
Manufacturers And Importers
Coffin and casket factories, funeral hardware importers and wholesalers, funeral homes and funeral directors, and cremation coffin producers.
What Problem We Solve
Consistency Order After Order
A rated lift weight you can quote to your own customer, and a plating tone that still matches when you re-order twelve months later.
Why Buy From Us
Our Own Moulds And Our Own Line
Tooling, casting, polishing, plating, moulding, metallizing, assembly and load testing all happen under one roof in Wenzhou.
Product Ranges
What We Manufacture
Metal Handle
94 references
Die cast zamak handles polished by hand and electroplated to gold nickel antique brass o...
Plastic Handle
41 references
Injection moulded ABS and PP handles vacuum metallized to a gold silver or copper finish...
Metal Crucifix & Fittings
56 references
Cast and stamped crucifix cross Christ figures name plates and lid fittings in metal...
Plastic Decoration
50 references
Injection moulded decoration vacuum metallized to gold silver or bronze for cremation co...
Casket Corner & Swing Bar
40 references
Cast corner pieces and swing bar hardware that carry both the load and the look of a cas...
Handle Set
12 references
Matched sets of arms end caps bars and screws packed by the set to cut assembly time...
Funeral Urn
19 references
Cremation urns in steel and ABS with coloured lacquer and applied decoration...
Manufacturing
From Zamak Ingot To A Plated Handle
Metal parts are die cast in Zamak #3, hand polished and electroplated. Plastic parts are injection moulded in ABS or PP, vacuum metallized and colour coated. Both routes run in the same building, which is why a metal handle and a plastic ornament can be matched to the same tone.
Raw Material
Zamak #3 ingot and ABS or PP resin checked before it goes into the cell.
Die Casting
Metal parts are die cast on our own machines from our own tooling.
Hand Polishing
Every casting is hand polished. Plating cannot hide a poor surface.
Electroplating
Gold, nickel, antique brass, antique copper or chrome.
Assembly
Arms, bars, caps and screws matched and assembled by hand.
Lift Weight Test
Load bearing models are checked on our own test rig before packing.
Production flow at our Wenzhou factory. Load bearing items pass the lift weight rig before they are packed.
Inside The Factory
Real Photographs From Our Own Line
Every photograph below was taken at our factory in Wenzhou. Nothing here is a stock image.
New Arrivals
Recently Added References
We keep developing new moulds and adding designs to the catalogue.
1070-3Handle Bar
Wooden Casket Handle 1070-3 in Metal Arm and End Cap With 22mm Wooden Bar by Customized Color
Zinc Alloy with wooden bar · lifts 150kgs (330lb)
P1Movable Handle
New Design Metal Casket Handle P1 In Antique Copper Color
Steel (Iron) · lifts 150kgs
1071-4Movable Handle
Casket Handle Swing Bar Design 1071-4 in Antique Brass Matte Color
Zinc Alloy (metal) · lifts 150kgs
1078Fixed Handle
Rose Design Metal Coffin Handle 1078 and Casket Handle Fittings
Zamak #0 · lifts 150kg/pc
1077Fixed Handle
Zamak Coffin Handle 1077 Polish Gold Color and Screw Rod Distance 170mm
Zamak （zinc alloy） · lifts More than 150kgs
8020Metal Ornament
Metal Ring for Coffin Lid in Zamak Material and Polished Gold Color
Zinc Alloy (metal)
8024Metal Ornament
Shining Gold Wooden Coffin Screw and Rose Design for Coffin Lid Decoration
Zinc Alloy (metal)
Quality Control
A Handle That Fails Is Not A Warranty Claim
A coffin handle is used once, in public, at the worst moment of someone's life. That is why we invested in lift weight testing equipment rather than quoting a load figure from a catalogue, and why load bearing models are checked during production instead of at the end.
- Incoming material checked before the casting or moulding cell
- In process inspection at casting, polishing and plating
- Lift weight testing on load bearing models
- Plating tone compared to the approved reference sample
- Count and pack verified before the carton is closed
Industries We Serve
Built Around How You Buy
Industry
Coffin & Casket Manufacturers
Container volume hardware with repeatable plating and matched sets for the assembly bench
Read more →
Industry
Funeral Homes & Directors
Hardware you can rely on during a service and hold as spares for repairs and refurbishment
Read more →
Industry
Importers & Distributors
A full programme from one factory so a container carries handles crucifix corners and urns together
Read more →
Industry
Cremation Providers
Light metallized fittings for coffins that will be cremated and urns for what comes after
Read more →
Solutions
Beyond The Catalogue
Solution
Custom Mould Development
From a drawing sample or photograph to a production mould held for your account
Read more →
Solution
Finishing & Colour Matching
Gold nickel antique brass antique copper and chrome held consistent from the first order to the tenth
Read more →
Solution
Supply & Export
Quotation samples production load testing packing and FCL or LCL shipment out of Wenzhou
Read more →
About Virtue Hardware
Trading Since 2007 Manufacturing Since 2016
Virtue Hardware started in the funeral business in 2007. At the beginning we were a trader for all kinds of funeral products, working with other factories on production while investing in our own moulds. In 2016 we established our own factory in Wenzhou, Zhejiang. It took two years to get production quality, mould development, management and quality control where we wanted them. Since 2018 the production and quality have been steady.
Questions
Frequently Asked Questions
The questions buyers ask us most often, answered without marketing language.
What do you manufacture?
Coffin handles in metal and plastic, crucifix, cross and Christ figures, casket fittings, corners and swing bars, applied ornament, name plates and funeral urns. There are 312 references in the catalogue at the moment.
Are you a factory or a trading company?
Both, in sequence. Virtue Hardware started in the funeral business in 2007 as a trader, investing in our own moulds while other factories did the production. In 2016 we built our own factory in Wenzhou, Zhejiang. By 2018 the production and quality had settled and we have produced in house since then.
What materials do you work in?
Mainly Zamak #3 zinc alloy, die cast, hand polished and electroplated. We also produce in steel, stainless steel 304 and 316, aluminium alloy and brass, and injection mould in ABS and PP with vacuum metallizing for the economy and cremation ranges.
Can your handles take the weight of a loaded coffin?
Load bearing models carry a stated lift weight, commonly 100kg, 150kg or 200kg per piece depending on the design. We have lift weight testing equipment in the factory and check handles during production rather than relying on a catalogue figure.
What is your minimum order quantity?
It varies by product because tooling and plating batch sizes differ. The figure shown on each product page is the one that applies. Common minimums are 1000 or 2000 pieces, and 100 sets for handle sets.
What is your lead time?
Typically 30 days after the order is confirmed, with some references at 35 to 45 days. We sometimes hold stock, so if you need goods urgently it is worth asking the sales team first.
Do you ship internationally?
Yes, worldwide, FCL or LCL. Most of our production has gone to Europe. Contact the sales department for freight cost and transit time to your location.
Can I get a sample before a bulk order?
Yes, samples are available for most products. Contact the sales team to discuss the details and the cost of the sample.
Next Step
Tell Us What You Need To Buy
Reference numbers, a photograph of a fitting you want matched, or just the type of coffin you build. We answer on WhatsApp and by email, and we do not use web forms.
WhatsApp +86 138 1154 0649 · [email protected] · +86-316-5997244